PRODUCTS CENTER

Email:[email protected]

en857 1sc/2sc rubber hose for mineral hydraulic oil

Hydraulic Hose - JYM

WIRE BRAID HOSE 7 EN857 2SC EN857 1SC APPLIION: Medium pressure hydraulic oil lines used in mobile,machine tool and agricultural appliion where higher temperature petroleum-or water based hydraulic fluids are a factor. Tube: One braid of high

Hydraulic hoses | General information

The most commonly used hydraulic hoses are according to EN853-1SN, 2SN, according to EN856-4SP, 4SH, according to EN857-1SC, 2SC, according to EN854-1TE, 2TE. Material of hydraulic hoses and fittings At the design of hydraulic hose we must take into consideration use of hose, medium and working parameters (pressure, temperature of medium / aient temperature).

Hydraulic Hose DIN EN 857 2SC - Techoses

Hydraulic Hose DIN EN 857 2SC Tube: Oil resistant synthetic rubber,suitable for hydraulic fluids. Reinforcement: Two braids of high tensile steel wire. Cover: Abrasion,oil and weather resistant synthetic rubber. Temperature range:-40 to +100

China High Performance Tractor Hydraulic Hoses 1sc 2sc R1at …

Product Description. 3/4" Inch High Pressure Steel Wire Braided Rubber Hose EN857-1SC. Structure:The hose is composed of inner rubber layer made from oil resistant synthetic rubber, one layer of steel wire braided reinforcement layer and outer rubber layer made also from oil resistant and weather resistant synthetic rubber.

Hydraulic Hose - JYM

WIRE BRAID HOSE 7 EN857 2SC EN857 1SC APPLIION: Medium pressure hydraulic oil lines used in mobile,machine tool and agricultural appliion where higher temperature petroleum-or water based hydraulic fluids are a factor. Tube: One braid of high

Diesse Rubber Hoses is a company with Quality System certified by …

Diesse Rubber Hoses is a company with Quality System certified by DNV UNI EN ISO 9001/2008 Approvals of hose and asselies: American Bureau of Shipping, Det Norske Veritas, Lloyd’s Register of Shipping, MSHA (Mine Safety and Healt Administration).

EN standard Hydraulic Hose – Multi-Choice for Various Equipment

EN 857 2SC hydraulic rubber hose serves high pressure hydraulic system where tight bends and maximum abrasion resistance performance is urgently needed. This type hydraulic hose owns oil resistant inner tube, which will not deform when transporting water based and petroleum based hydraulic fluids within -40 °C to +100 °C.

EN 857 1SC High Pressure Hydraulic Hose - Tighter Bend Radii

EN 857 1SC single braided high pressure hydraulic hose has smaller bend radius than SAE 100R1 - 75mm of 1/4inch bore size. EN 857 1SC single wire braid hydraulic hose for tight routing Reinforced by one high tensile wire braid, EN 857 1SC hydraulic hose has similar performance as its counterpart SAE 100R1 besides tighter bending radii.

DIN EN857 1SC-Hydraulic hose-Qingdao Hyrotech Rubber And …

DIN EN857 1SC. Construction: Tube: Oil resistant synthetic rubber. Reinforcement: One braid of high tensile steel wire. Cover:Oil and weather resistant synthetic rubber. Temperature: -40°C to +100°C. Appliion: Be suitable to carry hydraulic fluids,such as glycol,mineral oils,emulsion,hydrocarbons,etc. E-mail Send Message.

Hydraulic Hose DIN EN 857 2SC - Techoses

Hydraulic Hose DIN EN 857 2SC Tube: Oil resistant synthetic rubber,suitable for hydraulic fluids. Reinforcement: Two braids of high tensile steel wire. Cover: Abrasion,oil and weather resistant synthetic rubber. Temperature range:-40 to +100

DIN EN 857 2SC ::High pressure hose and Hydraulic hoses

DN Hose I.D Hose O.D Working Pressure Burst Pressure Minimum Bend Radius Weight inch mm mm Mpa psi Mpa psi mm kg/m 6 1/4" 6.4 14.2 45 6525 180 26100 75 0.28 8 5/16" 7.9 16 40 5800 160 23200 85 0.36 10 3/8" 9.5 18.3 37.5 5438 150 21750 90 0.41 13

EN857 2SC Pressure Flexible Wire Braided Hydraulic Rubber Hose from China manufacturer - Shijiazhuang standards rubber …

EN857 2SC Pressure Flexible Wire Braided Hydraulic Rubber Hose 1. Structure of Hydraulic Hose CONTINUOUS SERVICE TEMPERATURE RANGE: -40 F / +212 F; -40 C / +100 C MAX OPERATING TEMPERATURE: 250 F 121 C INSERT: SHF-TYPE TUBE: OIL RESISTANT SYNTHETIC RUBBER REINFORCEMENT: TWO HIGH TENSILE STEEL BRAIDS COVER: ENVIRONMENT RESISTANT …

DIN EN 857 2SC ::High pressure hose and Hydraulic hoses

DN Hose I.D Hose O.D Working Pressure Burst Pressure Minimum Bend Radius Weight inch mm mm Mpa psi Mpa psi mm kg/m 6 1/4" 6.4 14.2 45 6525 180 26100 75 0.28 8 5/16" 7.9 16 40 5800 160 23200 85 0.36 10 3/8" 9.5 18.3 37.5 5438 150 21750 90 0.41 13

China High Performance Tractor Hydraulic Hoses 1sc 2sc R1at …

Product Description. 3/4" Inch High Pressure Steel Wire Braided Rubber Hose EN857-1SC. Structure:The hose is composed of inner rubber layer made from oil resistant synthetic rubber, one layer of steel wire braided reinforcement layer and outer rubber layer made also from oil resistant and weather resistant synthetic rubber.

Sophson Hose - SAE100R1AT /EN853 1SN Descriptions

EN857 2SC Descriptions: Tube:€ synthetic rubber Reinforcement:€ Two braids of high tensile steel wire Cover:€ synthetic rubber Temperature:€-40 C / +100 C, Intermittent use up to 120 C; Appliion:€ Petroleum based hydraulic fluid, gasoline, water, diesel fuels, lubriing oils, glycol, mineral oils

DIN EN857 1SC-Hydraulic Hose-KDHOSE - Manufacturer of Hydraulic Hose and Rubber Hose

Wire Braid Hydraulic Hose: EN 857 1SC STANDARD. Tube: Oil resistant synthetic rubber. Reinforcement: one high tensile steel wire braid. Cover: Abrasion and weather resistant synthetic rubber. Temperature range: -40 ℃ to +100 ℃. DN. Hose I.D. Hose O.D. Working Pressure.

FLEXIBLE HYDRAULIC HOSE EN 857 2SC Flexible hydraulic hoses

Flexible hydraulic hoses. - FLEXIBLE HYDRAULIC HOSE EN 857 2SC: 5 Items. The hose acts as a passage for mineral or biological hydraulic oil, antifreeze solutions, air and water. -Synthetic rubber underlayer without joints and uniform thickness, resistant to hydraulic oils. -Reinforcement 2 high-strength steel braids.

Hydraulic Hose - JYM

WIRE BRAID HOSE 7 EN857 2SC EN857 1SC APPLIION: Medium pressure hydraulic oil lines used in mobile,machine tool and agricultural appliion where higher temperature petroleum-or water based hydraulic fluids are a factor. Tube: One braid of high

Sophson Hose - SAE100R1AT /EN853 1SN Descriptions

EN857 2SC Descriptions: Tube:€ synthetic rubber Reinforcement:€ Two braids of high tensile steel wire Cover:€ synthetic rubber Temperature:€-40 C / +100 C, Intermittent use up to 120 C; Appliion:€ Petroleum based hydraulic fluid, gasoline, water, diesel fuels, lubriing oils, glycol, mineral oils

EN 857 1SC High Pressure Hydraulic Hose - Tighter Bend Radii

EN 857 1SC single braided high pressure hydraulic hose has smaller bend radius than SAE 100R1 - 75mm of 1/4inch bore size. EN 857 1SC single wire braid hydraulic hose for tight routing Reinforced by one high tensile wire braid, EN 857 1SC hydraulic hose has similar performance as its counterpart SAE 100R1 besides tighter bending radii.

DIN 1SC Hydraulic Hose,1SC Hydraulic Hose

DIN 1SC High Pressure Cloth Surface Oil Resistant Hydraulic Hose 1. Structure of Hydraulic Hose CONTINUOUS SERVICE TEMPERATURE RANGE: -40 F / +212 F; -40 C / +100 C MAX OPERATING TEMPERATURE: 250 F 121 C INSERT: SHF-TYPE TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid COVER: Environment resistant synthetic rubber …

China En857 1sc 2schydraulic Hose Flexible Rubber Hose for Pressure Industrial - China Hydraulic Hose, High Pressure Hose

China En857 1sc 2schydraulic Hose Flexible Rubber Hose for Pressure Industrial, Find details about China Hydraulic Hose, High Pressure Hose from En857 1sc 2schydraulic Hose Flexible Rubber Hose for Pressure Industrial - HEBEI YOULU FLUID TECHNOLOGY

EN 857 1SC High Pressure Hydraulic Hose - Tighter Bend Radii

EN 857 1SC single braided high pressure hydraulic hose has smaller bend radius than SAE 100R1 - 75mm of 1/4inch bore size. EN 857 1SC single wire braid hydraulic hose for tight routing Reinforced by one high tensile wire braid, EN 857 1SC hydraulic hose has similar performance as its counterpart SAE 100R1 besides tighter bending radii.

LONG-LIFE FLEXIBLE HYDRAULIC HOSE - EN857-2SC- "2SC" …

The LongLife® 2SC – HYPAC 1SC EN857-1SC braided flexible hose is widely used in the hydraulic sector for pressures from 185 to 430 bar. The LongLife hose ensure long duration and exceptional quality of the materials used and the processing processes. “Peeling” is unnecessary to assele the fittings. In addition, the reduced cross-section compared to the 2SN series is particularly […]

Flexepulse Hydraulic Hose - Burley Hydraulics

Appliion:Veryhigh€pressure€hydraulic€lines.€Suitable€for€petroleum€based€hydraulic€fluids, such as mineral oils, fuels, hydrocarbons and glycol‐water based fluids. 08 5/16 14.3 16.7 5000 350 20000 1400 4.5 115 10 3/8 16.7 19.1 4785 330 19140

DIN 1SC Hydraulic Hose,1SC Hydraulic Hose

DIN 1SC High Pressure Cloth Surface Oil Resistant Hydraulic Hose 1. Structure of Hydraulic Hose CONTINUOUS SERVICE TEMPERATURE RANGE: -40 F / +212 F; -40 C / +100 C MAX OPERATING TEMPERATURE: 250 F 121 C INSERT: SHF-TYPE TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid COVER: Environment resistant synthetic rubber …

DIN EN 857 2SC ::High pressure hose and Hydraulic hoses

DN Hose I.D Hose O.D Working Pressure Burst Pressure Minimum Bend Radius Weight inch mm mm Mpa psi Mpa psi mm kg/m 6 1/4" 6.4 14.2 45 6525 180 26100 75 0.28 8 5/16" 7.9 16 40 5800 160 23200 85 0.36 10 3/8" 9.5 18.3 37.5 5438 150 21750 90 0.41 13

Hydraulic hoses - rubber hoses Hipac 1SC / 2SC / 3SC - HYDRO …

Temperature range 3SC: -40°C +100°C (120°C intermittent) Internal hose: synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: 1SC - one / 2SC - two / 3SC - three high tensile steel wire braids. External covering: anti-abrasive rubber, resistant to …

Hydraulic hoses - rubber hoses Hypress LongLife 1SC and 2 SC - …

Hypress LongLife 1SC / 2 SC - rubber hose. No skive, smooth cover hydraulic hose for medium (1SC) and high pressure (2SC) industrial appliions (e.g. construction sector). Exceed EN 857 1SC / EN 857 2SC. Max working pressure: 40 - 250 bar / 185 - 430 bar. Temp. range: -40°C +120°C (+135°C intermittent, +70°C for water based fluids)

DIN EN 857 1SC - Products - Ruhr Hose

DIN EN 857 1SC. Recommended For: Low-medium pressure,petroleum based fluids or glycol-water based fluids at high pressure.Such as mineral oils, fuels, hydrocarbons. Special Features: Working pressure exceeds EN857 1SC standard requirements. Good flexibility,lower bend radius.Suitable for complex high pressure hydraulic circuits.