PRODUCTS CENTER

Email:[email protected]

en 857 2sc high pressure fire hose

SR16SC SAE 100R16/EN 857 2SC | High Pressure - Process Hose …

SR16SC hose family are listed in Section 1 (starting on page 54) of the alog. Branding Example: Continental ContiTech SR16SC-04 SAE 100R16/EN 857 2SC 1/4" (DN06) W.P. 5800 psi (40 MPa) MSHA 2G-14C/12 SAE 100R16/EN 857 2SC | High Pressure

Teflon Product · Ocelot Rubber & Plastic Co.,LTD

EN 857 2SC Steel Wire Reinforced Hydraulic Hose with High Pressure Resistant Reinforcement Ocelot SAE 100 R2 Steel Wire Reinforced Hydraulic Hose with Oil Resistant Tube SAE 100 R5 Steel Wire Reinforced Hydraulic Hose with Braided Fiber Cover

DIN EN 857 2SC - Products - Ruhr Hose

DIN EN 857 2SC. Recommended For: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air. Special Features: Qualified for double impulse cycles (400,000 cycles) comparing with standards-EN857 2SC/ISO 11237-1.

RAILWAY HOSE - ALFAGOMMA

2SC RAILWAY ISO 11237 - EN 857 2SC - EN 45545-2 Tube: oil resistant synthetic rubber. Reinforcement: two high tensile steel braids. Cover: abrasion, ozone and hydrocarbon resistant synthetic rubber. Appliion: high pressure hydraulic lines, fuel oil

Medium Pressure No-Skive Hose BCH2 - EN 857 2SC - ISO 11237 | Parker…

Parker''s Parkrimp Medium Pressure No-Skive hose BCH2 according to EN 857 2SC - ISO 11237 with the No-Skive thin cover hose construction is a hose classified as "Good". This means that Good hoses are cost-effective products - fully meeting the main

Teflon Product · Ocelot Rubber & Plastic Co.,LTD

EN 857 2SC Steel Wire Reinforced Hydraulic Hose with High Pressure Resistant Reinforcement Ocelot SAE 100 R2 Steel Wire Reinforced Hydraulic Hose with Oil Resistant Tube SAE 100 R5 Steel Wire Reinforced Hydraulic Hose with Braided Fiber Cover

Parker BCH2 hydraulic hose | Hydraulic – Pneumatic Supplier in …

hose – EN 857 2SC – ISO 11237 Inner tube: Nitrile (NBR) Construction Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Recommended Fluids Hydraulic fluids on water-glycol and lubriing oils, air and water. For air and

TEKNO 2SC | Vitillo

EN 857 2SC - SAE100 R16 S Medium - High Pressure Hydraulic Lines - Return lines - Suction Lines Available cover: Standard Evergreen Forever Available cover color: Black Hose features: Reduced bending radius Type approval: MSHA - 40 C/+100 C (-40 F

DIN EN 857 2SC ::High pressure hose and Hydraulic hoses

DIN EN 857 1SC DIN EN 857 2SC Hebei Chengrui Rubber Hose Co., ltd. Add:New Industrial Zone, Hengshui, Hebei , China TEL: +86-318-2223999 FAX: +86-318-2223666

Hydraulic Hose - Semperit Technische Produkte Gesellschaft m.b.H.

Higher Pressure at reduced bend radii - exceeds DIN EN 857 2SC and SAE 100 R16S SEMPERRAIL 2SNK Compact hydraulic hose acc. EN45545-2 SEMPERSHIELD SSC High abrasion resistant hydraulic hose exceeds DIN EN 857 2SC DIN EN 853 1 SN

Hydraulic Hose

DIN EN 853 1SN/2SN DIN EN 857 1SC/2SC DIN EN 856 4SP/4SH High Pressure Wash Hose Industrial Hose Air/Water Hose Oil Hose Multipurpose Hose Water Suction Discharge Hose Oil Suction and Discharge Hose SAE 30R6 Welding Hose Steam Hose Sandblast Hose Concrete Hose

EN 857 2SC Hose Superior Flexibility and Abrasion Resistance - Hydraulic Hose - Spiral and Braided, Low to Super High Pressure

EN 857 2SC high pressure hydraulic hose for stringent appliions. High pressure and two wire braided EN 857 2SC hydraulic hose serves hydraulic systems where tight bends and maximum abrasion resistance is badly required. Its superior impulse performance and flexibility to SAE 100R2 and SAE 100R16 make it popular for many appliions.

DIN EN 857 2SC - Products - Ruhr Hose

DIN EN 857 2SC. Recommended For: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air. Special Features: Qualified for double impulse cycles (400,000 cycles) comparing with standards-EN857 2SC/ISO 11237-1.

EN 857 1SC Steel Wire Reinforced Hydraulic Hose - High pressure …

Details of EN 857 1SC steel wire reinforced hydraulic hose: Structure: it is composed of three parts: tube, reinforcement and cover. Tube: high quality synthetic rubber, making hose resistant to oil, abrasion and corrosion. Reinforcement: one layer of high tensile braided steel wire, making the hose work well in high pressure environment.

Hydraulic hoses - rubber hoses Hypress Marathon 2SC - HYDRO …

Exceed DIN EN 857 2SC / ISO 11237 2SC. Max working pressure: 250 - 450 bar. Temperature range: -40°C +120°C (+135°C intermittent) -40°C +70°C for water-based fluids. Internal hose: synthetic rubber, extruded whole without joints, of uniform thickness. Reinforcement: two high tensile steel wire braids.

Medium Pressure No-Skive Hose BCH2 - EN 857 2SC - ISO 11237 | …

Medium Pressure No-Skive Hose BCH2 - EN 857 2SC - ISO 11237. Parker Parkrimp No-Skive Hydraulic Hose BCH2 for demanding medium pressure hydraulic appliions in all markets up to a working pressure of max. 40.0 Mpa. The hose range is compatible with No-Skive fittings series 48.

Hydraulic Hose,hose and hydraulic,rubber hoses,steel spiral hose,steel braid hose,pressure washer hose manufactures China - DIN EN 857 2SC

Hydraulic Hose - DIN EN 857 2SC. Appliion:This section covers hose for use with petroleum base hydraulic fluids,Medium-high pressure lines. Construction: This hose consist of an inner tube of oil resistant synthetic rubber,two braids of steel wire reinforcement , and an oil and weather resistant synthetic rubber cover.

Hydraulic Hose,hose and hydraulic,rubber hoses,steel spiral …

9 · Hydraulic Hose - DIN EN 857 2SC. Appliion:This section covers hose for use with petroleum …

Parker BCH2 hydraulic hose | Hydraulic – Pneumatic Supplier in …

hose – EN 857 2SC – ISO 11237 Inner tube: Nitrile (NBR) Construction Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Recommended Fluids Hydraulic fluids on water-glycol and lubriing oils, air and water. For air and

Wholesale flexible quality high pressure 2 wire braid hydraulic hose EN 857 2sc …

Hydraulic Hose DIN EN 857 2SC. High pressure anti-million impulse hydraulic hose. 1 year warranty, no worry about hydraulic hose repair. Good Flexbility, highly anti-corrosion, anti-abrasion, anti-aging, etc. local_shipping Fast shipping, Evergood hose supports wholesale …

Hydraulics alog Hydraulic Hose, Fittings & Equipment

EN 857 2SC › High-pressure appliions with tight bends ID 1/4" - 2" 1/2 SCP3 SAE 100R17 EN 857 2SC › 1-braid hose › Meets higher EN/DIN pressures › Handles low temperatures ID 1/4" – 1" SR1SN SAE 100R1AT EN 853 1SN › 1-braid hose ›

New-Line Hose & Fittings

Aeroquip Fire Suppresion, Engine, & Specialty Hose. Aeroquip Generic Branded Hydraulic Hose. Aeroquip Spiral Hydraulic Hose. BOP & Kelly Hydraulic Hose; Saflex (Non-Eaton) Eaton & ContiTech DOT Air Brake Hydraulic Hose (SAE100R5) Generic Braided Hydraulic Hose.

TEKNO 2SC | Vitillo

EN 857 2SC - SAE100 R16 S Medium - High Pressure Hydraulic Lines - Return lines - Suction Lines Available cover: Standard Evergreen Forever Available cover color: Black Hose features: Reduced bending radius Type approval: MSHA - 40 C/+100 C (-40 F

Two-Wire Braided Hose - Rubber Hydraulic Hoses & Fittings - …

Meets or exceeds: SAE 100R16 Type S, EN 857 2SC, ISO 11237-1 Type 2SC Operating Temperature Range: –40°C to +100°C [–40°F to +212°F] Qualified fitting: TTC Series

2 STARK - Diesse Rubber

2 STARK. Extremely high pressure compact hose with greater flexibility. Exceeding SAE 100R16 – EN 857 2SC. Recommended for hydraulic appliions where a high pressure and a tighter bend radius is needed. Suitable for passage of mineral and vegetable oils, …

EN standard Hydraulic Hose – Multi-Choice for Various Equipment …

EN 857 2SC hydraulic rubber hose serves high pressure hydraulic system where tight bends and maximum abrasion resistance performance is urgently needed. This type hydraulic hose owns oil resistant inner tube, which will not deform when transporting water based and petroleum based hydraulic fluids within -40 °C to +100 °C.

EN 857 2SC Hose Superior Flexibility and Abrasion Resistance - Hydraulic Hose - Spiral and Braided, Low to Super High Pressure

EN 857 2SC high pressure hydraulic hose for stringent appliions. High pressure and two wire braided EN 857 2SC hydraulic hose serves hydraulic systems where tight bends and maximum abrasion resistance is badly required. Its superior impulse performance and flexibility to SAE 100R2 and SAE 100R16 make it popular for many appliions.

Hydraulic Hose - Semperit Technische Produkte Gesellschaft m.b.H.

Higher Pressure at reduced bend radii - exceeds DIN EN 857 2SC and SAE 100 R16S SEMPERRAIL 2SNK Compact hydraulic hose acc. EN45545-2 SEMPERSHIELD SSC High abrasion resistant hydraulic hose exceeds DIN EN 857 2SC DIN EN 853 1 SN

TEKNO 2SC | Vitillo

EN 857 2SC - SAE100 R16 S Medium - High Pressure Hydraulic Lines - Return lines - Suction Lines Available cover: Standard Evergreen Forever Available cover color: Black Hose features: Reduced bending radius Type approval: MSHA - 40 C/+100 C (-40 F

DS 2SC/R16 - Diesse Rubber

DS 2SC/R16. High pressure hose with extreme flexibility. Recommended for hydraulic appliions where a tighter bend radius is needed. Suitable for passage of mineral and vegetable oils, water-based solutions, water air and inert gases.