PRODUCTS CENTER

Email:[email protected]

sae 100r15 abrasion resistant flexible hose

OIL & GAS EXPLORATION HOSE PRODUCTS - Certified Power

CX 100R15 SIX SPIRAL WIRE HOSE Exceeds the requirements of SAE 100R12 - EN856 Tube: Nitrile Reinforcement: Four spirals of high tensile wire Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved Temperature: 40 C to +121 C (-40 F to +250 F)

Balflex® Powerspir BestFlex | 4SH & 100R13

Balflex® Powerspir - Best Flex 4 & 6 Wire Spiral (SAE 100R13) Oil, Weather, & Abrasion Resistant Synthetic Rubber Cover • 4 or 6 Very High Tencil Steel Braid • Very High Pressure. Appliion: Agriculture • Construction • Mining • Offshore/Marine • Oilfield. According to: ISO 3862 / EN 856 type R13 / SAE J517 type R13.

J-FLEX® Hydraulic Hose - Hydraulic Hose - SAE Standards - …

J-FLEX® 15M SAE 100R15 hose is compatible with biodegradable hydraulic fluids like vegetable oil as well as mineral and glycol based hydraulic fluids. It consists of an inner tube of oil-resistant special synthetic rubber, 4 or 6 spiral plies of heavy wire wrapped in alternating directions, and an oil, abrasion, and weather-resistant special rubber cover.

Extended Life Constant Pressure Spiral Hose

Outer cover with Extended Life 4 or 6 alternating layers Extra abrasion-, oil- & weather-resistant synthetic rubber of spiraled high-tensile steel wire 0 10 20 30 40 50 60 70 80 1 500 1000 1500 2000 You demand a lot from your hydraulic hose. That’s why we put so

XT ES Hose - Al-Bahar

erpillar Leading SAE 100R12 Competitors Abrasion Cycles XT ES SAE 100R12 XT-3 ES Hose Exceeds SAE 100R12 Standards Part No. Hose I.D. Hose Max. Work Min. Bend in (mm) Dash Pressure Radius* Size psi (kPa) in (mm) 165-0016 0.375 (9.5

R15 Spiral Hose - Rubber Hydraulic Hoses & Fittings - Eaton

2016/8/23· This hose offers cold temperature, high-pressure performance. Read this brochure to learn more about the features, benefits and technical specs. Eaton EC600 brochure Eaton is excited to introduce EC600, a more flexible SAE 100R15 spiral hose that is 24%

Hydraulic Hose SAE 100R15 - Techoses

Hydraulic Hose SAE 100R15 Tube: Oil resistant synthetic rubber,suitable for hydraulic fluids. Reinforcement: Four or six high tensile steel wire spiral layers. Cover: Abrasion,oil and weather resistant synthetic rubber. Temperature range:-40 to +100

Hydraulics alog Hydraulic Hose, Fittings & Equipment

Hydraulic Hose Line Varied pressures, abrasion levels and temperatures are no match for ContiTech Hydraulic Hose. HOSE XR16SC SAE 100R16 EN 857 2SC › High-pressure appliions with tight bends ID 1/4" - 2" 1/2 SCP3 SAE 100R17 › 1- or 2-braid hose ›

Eaton Polimer SEL hoses

Our SELPO and SELAR thermoplastic hoses meet and exceed SAE 100R7, 100R8, and 100R18. They offer huge advantages over other hose types—including low weight, twin or tri-lined bonded hoses, and better abrasion and UV resistance.

Hydraulic Hose | Hydrasource

A broad range of hydraulic hose options are available, with pressure ratings from SAE 100R1 (DIN EN853 ISN) up to SAE 100R15 to withstand the highest operating pressures. Hydrasource’s specially designed K-FLEX EXTREME will meet your toughest high-pressure and abrasive appliions without sacing bend radius performance.

Abrasion Resistant Hydraulic Hose - Tuff-Flex by Unisource …

Tuff-Flex Series abrasion resistant hydraulic hose maintains all of the specifiions and construction qualities of the Pressure-Flex Series, but with the added Tuff-Flex rubber cover for superior abrasion resistance. Made of special compounds, the Tuff-Flex cover offers 25 times the abrasion resistance of standard cover hydraulic hose, increasing service life, lowering maintenance, and

OIL & GAS EXPLORATION HOSE PRODUCTS - Certified Power

CX 100R15 SIX SPIRAL WIRE HOSE Exceeds the requirements of SAE 100R12 - EN856 Tube: Nitrile Reinforcement: Four spirals of high tensile wire Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved Temperature: 40 C to +121 C (-40 F to +250 F)

R15 Spiral Hose - Rubber Hydraulic Hoses & Fittings - Eaton

2016/8/23· This hose offers cold temperature, high-pressure performance. Read this brochure to learn more about the features, benefits and technical specs. Eaton EC600 brochure Eaton is excited to introduce EC600, a more flexible SAE 100R15 spiral hose that is 24%

Hydraulics Brochure Hydraulic Hose, Fittings & Equipment

Flexibility plays a major role in your hydraulic hose operation and efficiency. With a bend radius up to 1/2 that of SAE conventional spiral hose standards, our hose is extremely flexible, easier to route and reduces the chance of bending too tightly. This helps

Appliions: Hydraulics | Dayco Aftermarket North America | …

The Dayco style DKF15-SAE 100R15 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 12 – 20 and six spiral layers of high-tensile steel wire for size 24. The tube is designed from oil-resistant synthetic rubber with a cover designed to resist weather.

C6000D ISOBARIC - Four Wire Spiral 6100 psi Ultra Flexible Hose DIEHARD™ Cover - RYCO Hydraulics

Tested to 1 million impulse cycles at up to 1/2 SAE 100R15 Minimum Bend Radius. Constant pressure 420 bar / 6100 psi in all sizes for easy system design and hose selection. FRAS – FLAME RESISTANCE AND ANTI-STATIC: DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.

Hydraulics alog Hydraulic Hose, Fittings & Equipment

Hydraulic Hose Line Varied pressures, abrasion levels and temperatures are no match for ContiTech Hydraulic Hose. HOSE XR16SC SAE 100R16 EN 857 2SC › High-pressure appliions with tight bends ID 1/4" - 2" 1/2 SCP3 SAE 100R17 › 1- or 2-braid hose ›

Core Hydraulic Hose Products Brochure - Eaton Hydraulics - PDF …

Inner Tube: CPE Exceeds SAE 100R1 AT Type S, EN 853 1SN, ISO 1436-1 Type 1SN Performance Reinforcement: Part # Hose I.D. Operating Temperature: Fittings: -40 C to +100 C (-40 F to +212 F) z-Series Cover: Abrasion resistant UHMWPE Typical

6-wire hose selection - MFCP

Parker 782TC. No-skive hydraulic, abrasion resistant. constant working pressure (5,000psi), ISO/SAE/EN rated. Reinforcement: 4 wire or 6 wire. Cover: Synthetic rubber, abrasion resistant, MSHA accepted. Specs: SAE 100R13, ISO 3862-1 Type R13, EN 856 Type R13.

Parker Abrasion Resistant Hose Selection Page - MFCP

Abrasion Resistant Hose - ToughJacket Parker''s ToughJacket™ series of abrasion resistant hose covers is 650 times more durable and abrasion resistant when compared to standard rubber hose. The lightweight, compact ToughJacket™ offers superior UV resistance, excellent flexibility and a very low coefficient of friction.

Parker Abrasion Resistant Hose Selection Page - MFCP

Abrasion Resistant Hose - ToughJacket Parker''s ToughJacket™ series of abrasion resistant hose covers is 650 times more durable and abrasion resistant when compared to standard rubber hose. The lightweight, compact ToughJacket™ offers superior UV resistance, excellent flexibility and a very low coefficient of friction.

Eaton Polimer SEL hoses

Our SELPO and SELAR thermoplastic hoses meet and exceed SAE 100R7, 100R8, and 100R18. They offer huge advantages over other hose types—including low weight, twin or tri-lined bonded hoses, and better abrasion and UV resistance.

Hydraulics Brochure Hydraulic Hose, Fittings & Equipment

Flexibility plays a major role in your hydraulic hose operation and efficiency. With a bend radius up to 1/2 that of SAE conventional spiral hose standards, our hose is extremely flexible, easier to route and reduces the chance of bending too tightly. This helps

4 Wire Braided Hydraulic Hose Online - SAE100R15 | …

R15-24-Coil - 1-1/2" SAE 100R15 Hydraulic Hose - 131 feet. $7,915.86. Features: Inner Core: 4 Or 6 Steel Wire Spiral. Outer Cover: MSHA Certified, Vulcanized Abrasion and Weather Resistant Synthetic Rubber. Temp Operating Range: -40F/-40C to 212F/100C (+248F/120C max.) Technical Specs:

Hydraulics Brochure Hydraulic Hose, Fittings & Equipment

Flexibility plays a major role in your hydraulic hose operation and efficiency. With a bend radius up to 1/2 that of SAE conventional spiral hose standards, our hose is extremely flexible, easier to route and reduces the chance of bending too tightly. This helps

Hydraulics alog Hydraulic Hose, Fittings & Equipment

Hydraulic Hose Line Varied pressures, abrasion levels and temperatures are no match for ContiTech Hydraulic Hose. HOSE XR16SC SAE 100R16 EN 857 2SC › High-pressure appliions with tight bends ID 1/4" - 2" 1/2 SCP3 SAE 100R17 › 1- or 2-braid hose ›

Balflex® Powerspir BestFlex | 4SP & 100R15

Balflex® Powerspir - Best Flex 4 & 6 Wire Spiral (SAE 100R15) Oil, Weather, & Abrasion Resistant Synthetic Rubber Cover • 4 or 6 Very High Tencil Steel Braid • Very High Pressure. Appliion: Agriculture • Construction • Mining • Offshore/Marine • Oilfield. According to: ISO 3862 / EN 856 type 4SP / SAE 100R15 on sizes 3/8” and

100R13 Hose Specs | Hose and Fittings Source

Very High Pressure, Reinforced Hydraulic Hose for Petroleum Base Hydraulic Fluids. Inner Tube is Seamless Oil Resistant Synthetic Rubber. Reinforced 4 or 6 Spirals of High Tensile Steel Wire. Cover is Black, Oil, Weather and Abrasion Resistant Synthetic Rubber MSHA Approved. Safety Factor: 4:1. Temperature Range: – 40°F to 212°F (- 40°F to

SAE 100R17 Compact Wire Braided Constant Pressure Hydraulic Hose

SAE 100R17 wire braided hose ideal for minimal spacing 1-wire braid SAE 100R17 Compact hydraulic hose has smaller bend radius and is ideal for tight routing where hose space is limited. It provides continous working pressure to mining equipment, logging …

6-wire hose selection - MFCP

Parker 782TC. No-skive hydraulic, abrasion resistant. constant working pressure (5,000psi), ISO/SAE/EN rated. Reinforcement: 4 wire or 6 wire. Cover: Synthetic rubber, abrasion resistant, MSHA accepted. Specs: SAE 100R13, ISO 3862-1 Type R13, EN 856 Type R13.