PRODUCTS CENTER

Email:[email protected]

5 spiral lines hose material for sulfuric acid

Chemical Transfer Hose - Acid Resistant Hose - Chemical Suction & Discharge Transfer Hose - Acid Suction & Discharge Resistant Hose …

Chemical Hose / Acid Resistant Hose is available in almost limitless variations of chemical and acid-resistant tube/reinforcement/cover materials and thicknesses custom-engineered to handle most corrosive fluids. Appliion: Appliions include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries.

20135645 Continental WASHDOWN HOSE 3/4 ID X 500 FT. …

Buy Continental 20135645 WASHDOWN HOSE 3/4 ID X 500 FT. YELLOW at PartsSource. Largest Online marketplace for Medical Equipment Replacement Parts featuring OEM Biomedical parts. Medical parts online alog – easy part ID and

20135645 Continental WASHDOWN HOSE 3/4 ID X 500 FT. …

Buy Continental 20135645 WASHDOWN HOSE 3/4 ID X 500 FT. YELLOW at PartsSource. Largest Online marketplace for Medical Equipment Replacement Parts featuring OEM Biomedical parts. Medical parts online alog – easy part ID and

Gaskets - Sulphuric Acid

Introduction The following are recommended gaskets for use in strong sulphuric acid service. Acid Concentration : 90% to 100% H 2 SO 4 Temperature: 248 F (120 C) The ability of a gasket to effect a seal depends not only on the quality of the materials, but also

Nylon Hose Barb Fittings - Polyconn

Nylon Hose Barb Fittings. Nylon fittings are generally acceptable for working pressures up to 150 PSI at normal room temperatures. At very low pressures, temperatures can approach 175°F with no degradation of the fitting’s strength. Nylon has good resistance to a broad range of chemicals including most agricultural chemicals, ammonium

Sulphur Piping

Introduction It is a design and operating challenge to move molten sulphur around a plant. To keep the sulphur molten and pumpable at the proper viscosity, all piping and equipment handling molten sulphur must be heated and insulated. Steam jacketed piping is

Chemical Compatibility of the Tubing Materials

Chemical Compatibility of the Tubing Materials Name Tygon LFL Tygon ST R-3603 PharMed Tygon HC F-4040-A Tygon MH 2075 Tygon SI Silicone Platinum Silicone Peroxide Norprene A-60-G Flurane F-5500-A (Viton) 1: excellent; 2: good; 3: fair; 4: not

Piping for Sulfuric Acid - Pipelines, Piping and Fluid Mechanics …

2003/3/6· Sulfuric acid will only get really aggressive to carbon steel at 88% and below. Make it an all-welded system and use teflon gaskets like Garlock Gylon. Use Schedule 80 heavy wall pipe, and if it is seamed pipe put the seams on top. Keep the velocity below 5 feet per second.

DESIGN GUIDELINES FOR STAINLESS STEEL IN PIPING SYSTEMS - …

Sulfuric acid Type 304 can be used at room temperature for concentrations over 80%. Type 316 can be used in contact with sulfuric acid up to 10% at termpera- tures up to 120ºF (50ºC) if the solutions are aerated; the attack is greater in airfree solutions.

Evaluation of Loading and Unloading Operations for Sulphuric Acid and Spent Sulphuric Acid …

©2018 The Sulphur Institute Evaluation of Loading and Unloading Operations for Sulphuric Acid and Spent Sulphuric Acid Rail Tank Cars TSI and its meers prepared this report in good faith as a service to the industry. The information was provided by individuals

Chemical Hose | Parker NA

Acid & Chemicals Transfer hose - Series 7108. Series 7108 hose is designed for transfer of high aromatic content products such as ketone solvents, lacquers, paint thinners, oil-based and water-based paints and many common chemicals used in appliions to 93°C and 51,7 bar. 2 Parts. Viewing 10 of 2.

Alloy selection for service in sulphuric acid - Nickel Institute

5 Sulphuric acid manufacture The first step in the manufacturing process is the production of sulphur dioxide (SO 2) by oxidation of an available feedstock. Figure 1, a simplified flow diagram, presents three alternative routes for the generation of SO 2. The first of

Evaluation of Loading and Unloading Operations for Sulphuric Acid and Spent Sulphuric Acid …

©2018 The Sulphur Institute Evaluation of Loading and Unloading Operations for Sulphuric Acid and Spent Sulphuric Acid Rail Tank Cars TSI and its meers prepared this report in good faith as a service to the industry. The information was provided by individuals

Sulphur Piping

Introduction It is a design and operating challenge to move molten sulphur around a plant. To keep the sulphur molten and pumpable at the proper viscosity, all piping and equipment handling molten sulphur must be heated and insulated. Steam jacketed piping is

Gaskets - Sulphuric Acid

Introduction The following are recommended gaskets for use in strong sulphuric acid service. Acid Concentration : 90% to 100% H 2 SO 4 Temperature: 248 F (120 C) The ability of a gasket to effect a seal depends not only on the quality of the materials, but also

Chemical Resistant Hose | Chemical Hose Compatibility Tool

The most common asselies fabried by FlexFit Hose are PTFE lined hose with a 304 SS outer braid for reinforcement. 316L SS hose fittings and 304 SS hose ferrules. If your specific chemical, gas or granulate is not listed in the chemical hose compatibility tables, please send it to us via our Contact Us form and we will help you determine what chemical resistant hose configuration is best.

Piping for Sulfuric Acid - Pipelines, Piping and Fluid Mechanics …

2003/3/6· Sulfuric acid will only get really aggressive to carbon steel at 88% and below. Make it an all-welded system and use teflon gaskets like Garlock Gylon. Use Schedule 80 heavy wall pipe, and if it is seamed pipe put the seams on top. Keep the velocity below 5 feet per second.

DESIGN GUIDELINES FOR STAINLESS STEEL IN PIPING SYSTEMS - …

Sulfuric acid Type 304 can be used at room temperature for concentrations over 80%. Type 316 can be used in contact with sulfuric acid up to 10% at termpera- tures up to 120ºF (50ºC) if the solutions are aerated; the attack is greater in airfree solutions.

Rubber Lining | Lining and Liner | Duratech

KI -5 Black A57±7 ﹥5.88 >300 >6kg/cm ≧-0.098 100 Press vulcanization standard type, resistant to sulfuric acid and fluoric acid KI-15 Black A62±7 ﹥5.88 300 >6kg/cm Vulcanization at atmospheric pressure On-site lining, other features are as same as the

Material Plastic Piping for H2SO4 98 % - Sugison

The material’s resistance to both sulfuric acid and the common contaminant of SO 3 makes it an ideal choice for a piping material. Its chemical resistance is superior to that of other plastics such as PVC, PP and PVDF. Compared to carbon steel pipe it is

Gaskets - Sulphuric Acid

Introduction The following are recommended gaskets for use in strong sulphuric acid service. Acid Concentration : 90% to 100% H 2 SO 4 Temperature: 248 F (120 C) The ability of a gasket to effect a seal depends not only on the quality of the materials, but also

Rubber Lining | Lining and Liner | Duratech

KI -5 Black A57±7 ﹥5.88 >300 >6kg/cm ≧-0.098 100 Press vulcanization standard type, resistant to sulfuric acid and fluoric acid KI-15 Black A62±7 ﹥5.88 300 >6kg/cm Vulcanization at atmospheric pressure On-site lining, other features are as same as the

Piping for Sulfuric Acid - Pipelines, Piping and Fluid Mechanics …

2003/3/6· Sulfuric acid will only get really aggressive to carbon steel at 88% and below. Make it an all-welded system and use teflon gaskets like Garlock Gylon. Use Schedule 80 heavy wall pipe, and if it is seamed pipe put the seams on top. Keep the velocity below 5 feet per second.

TIP 0606-26 Sulfuric acid (H2SO4) safe storage and handling

5 / Sulfuric acid (H 2SO 4) safe storage and handling TIP 0606-26 Tank trucks Single unit tank trucks are used for shipping all grades of sulfuric acid in capacities ranging up to 45 tons. The trailers are predominantly 316 L stainless steel, or in some instances

Alloy selection for service in sulphuric acid - Nickel Institute

5 Sulphuric acid manufacture The first step in the manufacturing process is the production of sulphur dioxide (SO 2) by oxidation of an available feedstock. Figure 1, a simplified flow diagram, presents three alternative routes for the generation of SO 2. The first of

TIP 0606-26 Sulfuric acid (H2SO4) safe storage and handling

5 / Sulfuric acid (H 2SO 4) safe storage and handling TIP 0606-26 Tank trucks Single unit tank trucks are used for shipping all grades of sulfuric acid in capacities ranging up to 45 tons. The trailers are predominantly 316 L stainless steel, or in some instances

Sulphur Piping

Introduction It is a design and operating challenge to move molten sulphur around a plant. To keep the sulphur molten and pumpable at the proper viscosity, all piping and equipment handling molten sulphur must be heated and insulated. Steam jacketed piping is

TIP 0606-26 Sulfuric acid (H2SO4) safe storage and handling

5 / Sulfuric acid (H 2SO 4) safe storage and handling TIP 0606-26 Tank trucks Single unit tank trucks are used for shipping all grades of sulfuric acid in capacities ranging up to 45 tons. The trailers are predominantly 316 L stainless steel, or in some instances

Chemical Compatibility of the Tubing Materials

Chemical Compatibility of the Tubing Materials Name Tygon LFL Tygon ST R-3603 PharMed Tygon HC F-4040-A Tygon MH 2075 Tygon SI Silicone Platinum Silicone Peroxide Norprene A-60-G Flurane F-5500-A (Viton) 1: excellent; 2: good; 3: fair; 4: not

Sulphur Piping

Introduction It is a design and operating challenge to move molten sulphur around a plant. To keep the sulphur molten and pumpable at the proper viscosity, all piping and equipment handling molten sulphur must be heated and insulated. Steam jacketed piping is